Driving Directions
TRAVEL ADVISORY:
Airport Roadway Construction Project
August 23rd the airport began repairing the airport’s roadways performing patching and overlaying. All roads will remain open but may be narrowed down to one lane. In addition to repairs, the airport will be installing raised crosswalks in an effort to improve handicap accessibility and slow traffic on the departure and arrival roadways where there is heavy pedestrian traffic. This project shouldn’t cause more than a minute or two’s delay to motorists using the airport’s roadways.
Inner Dispersal Loop Rebuilding Project
Starting the week of July 20th, all lanes of westbound I-244 on the north and west legs of Tulsa's Inner Dispersal Loop will be closed to traffic. This includes portions of westbound I-244/US-412, and east bound US-64/SH-51. Airport bound drivers should not experience any delays resulting from this phase of construction, however should take into consideration planning an alternate route when returning home.
This project is scheduled for completion no later than February. For more information, visit http://www.okladot.state.ok.us/newsmedia/traffax/tulsa/.
Get directions from your specific location from Google, click here.
Driving directions coming from:
- From I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal
- From I-244 W, exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
- From HW 169 N, exit onto I-244 west, from I-244 W exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
- From the Owasso / Collinsville areas, take HW 169 S, exit I-244 W, from I-244 W exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
- From the Broken Arrow area, take HW 64/51 W (Broken Arrow Expressway), exit HW 169 N, from HW 169 N, exit onto I-244 west, from I-244 W exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
- From the Glenpool / Okmulgee area, take HW 75 N, follow signs for I-244 E, from I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal.
- From the Sand Springs area, take HW 64/51 E (Broken Arrow Expressway), exit I-244 E, from I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal.
- From the Sapulpa area, take I-44 E, take the HW 75 N inter-change, exit I-244 E, From I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal.
- From the Catoosa / Claremore areas, take I-44 W, merge right onto I-244 W, from I-244 W, exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.